corona on mac

Getting Started Newbie Questions
#1

hello! a friend of mine gave me his macbook , and i try to install corona there, but i have a problem…
corona says me that that corona is not supported in this type of mac… i thought then that maybe the problem was the mac’s kernel version , which i updated in 10.8 version… but nothings happend… i think that maybe the problem is the system verion which is 10.6.8 . Does anyone know how can update the systems version?? or in general what is the problem??

System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: MyDisk
Boot Mode: Normal
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 7 minutes

Model Name: MacBook
Model Identifier: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
[import]uid: 168570 topic_id: 31345 reply_id: 331345[/import]

#2

I too got one of these from a friend.

Unfortuneatly mac osx 10.6 is the latest version you can run on this device.
In order to run 10.7 or 10.8 - you need a Core2 Duo (that runs 64bit).

You will not be able to load xcode4.5 and the latest corona 919+ to do iOS6 apps on this device, but you can stay with 10.6, load a newer xcode (from the 10.7 builds) and use a older cornona build to do iOS5.1 apps.

One of the Clabs staff wrote up a procedure to use a xcode for 10.7 on a 10.6 box in this forum. Find it, and load only that xcode, and a corona sdk of about the same age…

Good Luck, the process worked for me… [import]uid: 9070 topic_id: 31345 reply_id: 125284[/import]

#3

I too got one of these from a friend.

Unfortuneatly mac osx 10.6 is the latest version you can run on this device.
In order to run 10.7 or 10.8 - you need a Core2 Duo (that runs 64bit).

You will not be able to load xcode4.5 and the latest corona 919+ to do iOS6 apps on this device, but you can stay with 10.6, load a newer xcode (from the 10.7 builds) and use a older cornona build to do iOS5.1 apps.

One of the Clabs staff wrote up a procedure to use a xcode for 10.7 on a 10.6 box in this forum. Find it, and load only that xcode, and a corona sdk of about the same age…

Good Luck, the process worked for me… [import]uid: 9070 topic_id: 31345 reply_id: 125284[/import]