Just uploaded the logs.
Hello Renato,
Thank you for uploading the logs. We took a look at will improve some aspects of the program accordingly.
Most of the problems seem to be occurring in the tcpip connection.
Regards,
M.Y. Developers
Hello Renato,
There is an update that should resolve this issue. Please let us know if it helps.
Regards,
M.Y. Developers
Great. I will test it.
I noticed that that problem happens after using Glider for several hours. Then I just close it and open it again that the lag is gone.
Thanks Renato. The dump that was uploaded did not suggest a memory leak. Please let us know if you see any difference.
Regards,
M.Y. Developers
Hi M.Y. Just installed the new version and now in fact it got worst. When I press Play in Glider, Corona Simulator open and keeps all black as waiting for something. If press the Hammer button, the Corona works fine. And if I press Play after pressing the Hammer button, the Corona also runs fine.
The Glider output does not show anything on output and the Glider IDE logs only shows the following:
2013-12-27 14:13:08.269 Corona Simulator[84722:507]
Copyright © 2009-2013 C o r o n a L a b s I n c .
2013-12-27 14:13:08.269 Corona Simulator[84722:507] Version: 3.0.0
2013-12-27 14:13:08.269 Corona Simulator[84722:507] Build: 2013.2100
2013-12-27 14:13:08.438 Corona Simulator[84722:507] The file sandbox for this project is located at the following folder:
(/Users/RSC/Library/Application Support/Corona Simulator/Look Like-7ECE6B2821E6E4FE48FCE5D7802CC2BD)
2013-12-27 14:13:08.474 Corona Simulator[84722:507] binding to port 36752
2013-12-27 14:13:08.475 Corona Simulator[84722:507] listening on port 36752
2013-12-27 14:13:59.866 Corona Simulator[84722:507] termination requested by 3rd party … shutting down (signal 15)
Just uploaded the logs for you.
Hello Renato,
Thanks for the logs. We will have an update that should fix this shortly.
Regards,
M.Y. Developers
Hello Renato,
There is an update that should fix this issue.
Regards,
M.Y. Developers
Yes, it solved.
Just upload more logs for you regarding the CPU consumption going extremely high.
I was not with the Corona Simulator open and the Code Completion was also turned off.
My activity monitor screenshot attached.
Now the activity monitor with the Corona Simulator opened.
Thanks for the logs Renato. From the looks of it this is the same issue as http://forums.coronalabs.com/topic/42981-performance-degrades-over-time/
We will be working to fix this issue over the next few days.
Regards,
M.Y. Developers
I am running that new version for a few weeks now and although It didn’t remove all occurrences of SSS, it reduced it a lot. So, everyone that is facing the problem should update to that new version.
Hello Renato,
Thats great news. Its good to know we are moving in the right direction. Are you able to find a pattern to the remaining lock-ups?
Regards,
M.Y. Developers
I noticed that luaGlider sometimes get too slow (consuming a lot of cpu) when I am editing a file and the Corona Simulator is open/running. If I close the simulator, luaGlider comes to normal.
Hello Renato,
Thanks for the observation. There should be very little traffic between the simulator and Corona unless you are at a breakpoint or the mouse hovers over a symbol. Glider also adds symbols to the autocomplete database based on the debugger feedback but it does so only when you are at a breakpoint, this could potentially be a source of the cpu consumption.
Does any of this seem like it could be causing the problem for you?
Regards,
M.Y. Developers
No, I was not running on Debug Mode. It was happening both when running the Simulador thru the Play button or the Hammer button.
But that problem also don’t happen always. I just noticed now that when I start to see some performance problem, it is related to that.
Is there anything that I can do (look at some log file,…) when the Glider starts to freeze that can help you guys figure out the root cause?
Hello Renato,
Please send logs via help-> upload logs.
Regards,
M.Y. Developers
Just uploaded the logs.
Hello Renato,
Thank you for uploading the logs. We took a look at will improve some aspects of the program accordingly.
Most of the problems seem to be occurring in the tcpip connection.
Regards,
M.Y. Developers