Yet another corona remote for Android

Solar2D Android
#1

Hey guys,

I’m proud to announce that there is a new corona remote for Android - rCorona.
The rCorona sends accelerometer data and touch data to the simulator.

* With great performance by using udp
* Send accelerometer data, and/or touch data at the same time
* Different stage sizes OK! iPad simulator by using smaller screen resolution’s android transmitter WORKS PERFECTLY
* Set once and forget

Check it out at
http://rcorona.wongcharles.com [import]uid: 75843 topic_id: 12478 reply_id: 312478[/import]

#2

Free Version available at
https://market.android.com/details?id=com.cwong.apps.rcoronalite

limited to 5 minute of use time [import]uid: 75843 topic_id: 12478 reply_id: 45660[/import]

#3

Some of you may encounter problem when trying to open rCorona.
Please download the newer version and try again.
Sorry for the inconvenience. [import]uid: 75843 topic_id: 12478 reply_id: 46023[/import]

#4

new version available now! [import]uid: 75843 topic_id: 12478 reply_id: 46670[/import]

#5

new demonstration video:
http://www.youtube.com/watch?v=ACKFSPypeMI

ios version also available now. [import]uid: 75843 topic_id: 12478 reply_id: 47912[/import]

#6

The iOS version doesn’t support multi-touch. Easily demonstrable if you touch on your iOS device with more than 1 finger - you will see only 1 crosshair, jumping randomly between two points where you touched.
On Android multitouch works, kinda - 2 fingers get recognized BUT randomly coordinates X or Y will switch so you will get completely incorrect reading (while on the device - crosshairs will move on a wrong place on the screen – not the place you are touching).

Also, sometimes the app (iOS or Android) will connect and sometimes it wont. Restarting any of the software included (even restarting WiFi) won’t do much good.

Maybe it used to work when it was released, but not anymore.

Still in search for a somewhat reliable remote for corona… [import]uid: 4294 topic_id: 12478 reply_id: 133955[/import]

#7

The iOS version doesn’t support multi-touch. Easily demonstrable if you touch on your iOS device with more than 1 finger - you will see only 1 crosshair, jumping randomly between two points where you touched.
On Android multitouch works, kinda - 2 fingers get recognized BUT randomly coordinates X or Y will switch so you will get completely incorrect reading (while on the device - crosshairs will move on a wrong place on the screen – not the place you are touching).

Also, sometimes the app (iOS or Android) will connect and sometimes it wont. Restarting any of the software included (even restarting WiFi) won’t do much good.

Maybe it used to work when it was released, but not anymore.

Still in search for a somewhat reliable remote for corona… [import]uid: 4294 topic_id: 12478 reply_id: 133955[/import]